方转圆对三维侧压进气道的流动特性影响

针对三维侧压进气道开展了方转圆研究,通过数值模拟对比了矩形出口、隔离段方转圆和内收缩段方转圆这3种方案进气道的基本性能和流场结构,分析了方转圆过程对进气道性能和流场结构的影响规律。结果表明:采用方转圆隔离段的三维侧压进气道总体性能要优于原型进气道,而在两个方转圆方案中,将内收缩段和隔离段视为一个整体进行方转圆的方案3,要优于从喉部截面开始方转圆的方案2;3种方案进气道隔离段二次流动的共同特点是在底板附近存在方向相反的两个流向涡,它们的强弱关系决定了底板低能流动的分布;始于侧板前缘根部的方转圆过程较始于喉部的方转圆过程对靠近侧板的流向涡的增强作用更大,这个涡提供的"下卷"作用具有改善角区低能流动的效果。     

Feature analysis on US military aircraft engine advanced technology programs

US military aircraft engine advanced technology programs were overviewed and analyzed from light weight gas generator (LWGG) program initiated in 1960s through integrated high performance turbine engine technology (IHPTET) program started in 1980s, then to versatile affordable advanced turbine engine (VAATE) program. Some features and trends were summarized and concluded by literature statistics method, such as teams based on closely corporation among government, industries and academics, goals oriented with national defence strategies and weapon system development requirements, engineering manufacture and development including all relative disciplines and areas, verification measured by technology readiness level, the application extending to military aircraft engine, civilian engine, gas turbine and space vehicle, etc. The experience and lessons obtained can provide reference and guide for technology research and engineering manufacture and development of military aircraft engines in the world.     

基于RTX子系统的导弹试验实时测控系统

导弹试验实时测控系统是空空导弹制导系统半实物仿真试验平台的主要设备之一,服务于新型导弹的研制、试验、优化和评估。系统采用RTX实时开发技术,克服了Windows系统实时性差的局限性,解决了测控系统实时与非实时任务兼容处理难的问题,实现了空空导弹半实物仿真试验的实时仿真和实时测控。系统利用RTX子系统的开放性,重新开发了所用仪器板卡在RTX环境下的驱动程序,实现了应用程序的设备无关性,提高了导弹试验验证的有效性和系统性。     

航空发动机盘件径轴向裂纹底波监控超声检测方法研究

针对某航空发动机盘件中的径轴向裂纹,采用不同焦距的5MHz、10MHz聚焦探头和平探头,分别在0°,1°,2°,3°的声束入射角度下进行检测试验,通过对入射角度以及探头类型、频率、焦距等参数的优化,建立了径轴向裂纹的底波监控超声检测方法。研究发现:与垂直入射相比,小角度纵波斜入射底波监控超声检测方法可提高超声波对裂纹的敏感程度;使用焦距为89mm的10MHz聚焦探头,并使声束以2°入射角斜入射可得到最佳检测效果,试验结果与数值模拟具有良好的一致性。     

氧化铝陶瓷的理化性能对其防弹性能的影响研究

利用半水基注凝成型工艺制备了92瓷(A92)、96瓷(A96、A96T)和99瓷(A99)四种不同成分的氧化铝陶瓷防弹板.通过理化性能的分析以及防弹性能的表征,研究了不同理化性能的陶瓷对其防弹性能的影响.研究结果表明,在同样的打靶试验参数下,氧化铝含量越高,打靶试验中45#钢背板的凹陷越小,抗弹能力越强,但是由于密度也在增大,A99的防护系数反而变小.在氧化铝含量相同的情况下,断裂韧性高密度小的抗弹性能更好.     

航天器软件风险集成管理方法

为确保航天器软件产品功能、性能符合任务需求,安全、可靠地完成飞行任务,需要对其进行风险管理。文章首先介绍了软件风险管理理论研究现状;然后结合航天器软件强实时性、高可靠性和安全性、维护困难等问题,提出了基于系统集成思想的软件风险控制方法;最后以某航天器为例介绍了该套方法的应用成果。研究结果可为识别航天器软件风险,提高软件产品质量提供参考。     

轴编C/C复合材料组分材料有效性能

利用光学显微镜观测和测量轴编C/C复合材料细观编织结构及其尺寸,建立轴编C/C复合材料有限元模型,通过给出组分材料有效性能的变化区间,构造组分材料性能与轴编C/C复合材料宏观有效性能的对应关系,利用径向基函数(RBF)人工神经网络(ANN)方法,对该高度非线性的对应关系进行训练,通过轴编C/C复合材料宏观实验结果,预报其组分材料的有效性能。结果表明,轴编C/C复合材料面内弹性性能基本相同,在测量时可忽略面内纤维束铺设方向的影响;人工神经网络对训练样本有一定的依赖性,但通过多次随机构造样本训练网络,可得到理想的预测结果,且人工神经网络方法具有很好的容错性,能很好地预报轴编C/C复合材料组分材料的有效性能。     

Coupled Lagrangian impingement spray model for doublet impinging injectors under liquid rocket engine operating conditions

To predict the effect of the liquid rocket engine combustion chamber conditions on the impingement spray, the conventional uncoupled spray model for impinging injectors is extended by considering the coupling of the jet impingement process and the ambient gas field. The new coupled model consists of the plain-orifice sub-model, the jet-jet impingement sub-model and the droplet collision sub-model. The parameters of the child droplet are determined with the jet-jet impingement sub-model using correlations about the liquid jet parameters and the chamber conditions.The overall model is benchmarked under various impingement angles, jet momentum and offcenter ratios. Agreement with the published experimental data validates the ability of the model to predict the key spray characteristics, such as the mass flux and mixture ratio distributions in quiescent air. Besides, impinging sprays under changing ambient pressure and non-uniform gas flow are investigated to explore the effect of liquid rocket engine chamber conditions. First, a transient impingement spray during engine start-up phase is simulated with prescribed pressure profile. The minimum average droplet diameter is achieved when the orifices work in cavitation state, and is about 30% smaller than the steady single phase state. Second, the effect of non-uniform gas flow produces off-center impingement and the rotated spray fan by 38°. The proposed model suggests more reasonable impingement spray characteristics than the uncoupled one and can be used as the first step in the complex simulation of coupling impingement spray and combustion in liquid rocket engines.     

曲线拟合参数估计法的目标散射中心提取

提出了一种基于几何绕射理论(GTD)模型的曲线拟合参数估计法,用于目标散射中心的提取.根据二维散射中心GTD模型,分角度分离目标的距离向散射中心,对不同角度的散射中心距离和幅相进行曲线拟合,提取目标二维散射中心参数,可估算散射体的曲率半径,较精确地计算转台中心至天线的距离.算例表明:对大角度成像、遮挡、平板散射等用该法重构的雷达散射截面(RCS)与原始数据较吻合.